Husqvarna FS 450 2015, Repair Manual

Page: 65 / 249

9 SHOCK ABSORBER, SWINGARM
Main work
-
Lubricate the O-rings of the compression adjuster.
I
Lubricant (T158) ( l!lJJ p. 224)
-
Lubricate the threads.
I
Lubricant (T159) ( !!l p. 224)
-
Mount the piston with the spring.
-
Mount and tighten the compression adjuster
O.
Guideline
63
I
Compression adjuster
I
M31x1
I
45 Nm (33.2 lbf ft)
I
-
Clamp the damper in a bench vise.
Guideline I
Use soft jaws.
-
Mount adjusting ring @ with the intermediate washer.
Info
The adjusting ring cannot be mounted after the piston rod is mounted.
-
Fill the damper cartridge about half full.
I
Shock absorber fluid (SAE 2.5) (50180751 S1) ( � p. 222)
-
Lubricate O-ring
8
of the seal ring retainer.
I
Lubricant (T158) ( � p. 224)
-
Mount the piston rod carefully.
-
Install the seal ring bearer
C,
and push it under the ring groove.
-
Mount lock ring
0-
•
Info
I
Do not scratch the inner surface.
-
Pull out the piston rod so that the seal ring retainer rests against the lock ring.
-
Mount locking cap
(D
of the damper cartridge.
-
Bleed and fill the damper. ( !!l p. 64)
-
Fill the damper with nitrogen. ( l!lJJ p. 67)
-
Mount rubber cap @ of the reservoir.