Husqvarna F2201U1, Owner'S Manual

Page: 149 / 163

TECHNICAL DATA 22
147
Spring length 260 mm (10.24 in)
Gas pressure 10 bar (145 psi)
Static sag 35 mm (1.38 in)
Riding sag 105 mm (4.13 in)
Fitted length 477 mm (18.78 in)
Shock absorber oil Shock absorber fluid (SAE 2.5)
(50180751S1) (
p. 150)
22.9 Chassis tightening torques
Screw, air filter box EJOT PT
®
K70x25 5 Nm (3.7 lbf ft)
Screw, combination switch EJOT PT
®
K50x18 2 Nm (1.5 lbf ft)
Screw, intake air temperature sen-
sor EJOT DELTA PT
®
45x12
‑
Z 0.7 Nm (0.52 lbf ft)
Fitting, start button M3 1 Nm (0.7 lbf ft)
Fitting, switch-off button M3 1 Nm (0.7 lbf ft)
Fitting, inlet sleeve to throttle
valve body M4 5 Nm (3.7 lbf ft)
Screw, fixed grip M4 5 Nm (3.7 lbf ft)
Loctite
®
243™
Screw, service hour counter M4 1 Nm (0.7 lbf ft)
Screw, throttle valve body hose
clamp M4 2.8 Nm (2.07 lbf ft)
Spoke nipple, front wheel M4.5 6 Nm (4.4 lbf ft)
Spoke nipple, rear wheel M4.5 6 Nm (4.4 lbf ft)
Remaining nuts, chassis M5 5 Nm (3.7 lbf ft)
Remaining screws, chassis M5 5 Nm (3.7 lbf ft)
Screw, battery terminal M5 2.5 Nm (1.84 lbf ft)
Screw, frame protector M5 3 Nm (2.2 lbf ft)
Screw, shock absorber adjusting
ring M5 5 Nm (3.7 lbf ft)
Screw, throttle valve body cover M5 2.6 Nm (1.92 lbf ft)
Nut, cable on starter motor M6 4 Nm (3 lbf ft)
Nut, throttle cable on throttle
valve body M6 3 Nm (2.2 lbf ft)
Remaining nuts, chassis M6 10 Nm (7.4 lbf ft)
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Screw, ball joint of push rod on
foot brake cylinder M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, chain sliding guard M6 6 Nm (4.4 lbf ft)
Loctite
®
243™
Screw, front brake disc M6 14 Nm (10.3 lbf ft)
Loctite
®
243™
Screw, indicator lamp bracket M6 5 Nm (3.7 lbf ft)
Screw, rear brake disc M6 14 Nm (10.3 lbf ft)
Loctite
®
243™
Screw, throttle grip M6 5 Nm (3.7 lbf ft)