Husqvarna F2201U1, Owner'S Manual

Page: 114 / 163

14 ELECTRICAL SYSTEM
112
charge the 12 V battery with these battery chargers.
The charging time may be longer at low temperatures.
These battery chargers are only suitable for lithium
iron phosphate batteries. Read the accompanying
instructions for
Husqvarna Motorcycles
accessories.
Info
Never remove cover
1
.
–
Switch off the battery charger after charging and disconnect
from the 12 V battery.
Finishing work
–
Install the 12 V battery. ( p. 110)
–
Mount the seat. ( p. 65)
–
Install the air filter box cover. ( p. 66)
14.4 Changing the main fuse
Warning
Fire hazard Incorrect fuses overload the electrical system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
Caution
Danger of burns
The voltage regulator gets very hot when the vehicle is driven.
–
Allow the voltage regulator to cool down before performing any work.
Info
The main fuse protects all power consumers of the vehicle. It is located in the starter relay housing
under the seat.
Preparatory work
–
Press and hold the switch-off button while the engine is
idling until the engine stops.
–
Remove the air filter box cover. ( p. 66)
–
Remove the seat. ( p. 65)
S02323-10
Main work
–
Pull starter relay
1
from the holder.