Husqvarna F2201U1, Owner'S Manual

Page: 84 / 163

11 SERVICE WORK ON THE CHASSIS
82
V01552-01
Main work
–
Check throttle cable routing.
Both throttle cables must be routed, side by side, on the
back of the handlebars and above the fuel tank bracket,
to the throttle valve body. Both throttle cables must be
secured behind the rubber strap of the fuel tank support.
» If the throttle cable routing is not as specified:
–
Correct the throttle cable routing.
Finishing work
–
Install the fuel tank. ( p. 73)
–
Install the right side cover. ( p. 71)
–
Mount the seat. ( p. 65)
–
Install the air filter box cover. ( p. 66)
11.42 Checking the rubber grips
401197-01
–
Check the rubber grips on the handlebar for damage, wear,
and looseness.
Info
The rubber grips are vulcanized onto a sleeve on the
left and onto the handle tube of the throttle grip on the
right. The left sleeve is clamped onto the handlebar.
The rubber grip can only be replaced with the sleeve
or the throttle tube.
» If a rubber grip is damaged or worn:
–
Change the rubber grip.
E00265-10
–
Check that screw
1
is firmly seated.
Guideline
Screw, fixed
grip M4 5 Nm (3.7 lbf ft)
Loctite
®
243™
The diamond
A
must be located at the top.