Husqvarna F2201U1, Owner'S Manual

Page: 32 / 163

8 RIDING INSTRUCTIONS
30
H02884-01
–
Press and hold the MAP and TC buttons simultaneously.
The malfunction indicator lamp flashes orange rapidly.
Info
The launch control is deactivated automatically for a
few seconds after the vehicle has started.
The launch control is also deactivated in the following
cases (malfunction indicator lamp no longer flashes): if
the throttle valve is closed more than 1/3 of the way
after full throttle, and/or if there is no start within
3 minutes.
For safety reasons, the engine must be switched off
for at least 10 seconds before the launch control can
be activated again, regardless of whether the vehicle
has been started or not.
If the engine has already been running for some time,
the engine must first be restarted before the launch
control can be activated.
8.4 Activating traction control
Info
The traction control reduces excessive slip on the rear wheel in favor of more control and propulsion,
particularly in wet conditions.
When traction control is switched off, the rear wheel may spin more during high acceleration and on sur-
faces with low grip.
Traction control can be switched on or off during the ride.
The setting most recently selected is activated again when restarting.
H02885-01
–
Press button TC to switch the traction control on or off.
Guideline
Engine speed
≤
4,000 rpm
The TC LED lights up when the traction control is acti-
vated.
8.5 Starting off
–
Pull the clutch lever, engage 1st gear, release the clutch lever slowly and simultaneously open the throttle
carefully.