28
SERVICE SCHEDULE
Every 30 operating hours
Every 20 operating hours
Every 10 operating hours/after every race
Once after 1 operating hour
Check the screws and nuts for tightness.
Change the fuel screen. (
a
p. 111)
Check the fuel pressure. (
a
p. 104)
Check the idle speed.
Final check: Check the vehicle for safe operation and take a test ride.
Read out the fault memory after the test ride using the Husqvarna Motorcycles diagnostics
tool.
Make the service entry in
Husqvarna Motorcycles Dealer.net
and in the Service & Manu-
facturer Warranty Booklet.
o
One-time interval
•
Periodic interval
28.3
Recommended work
0
0
0
0
0
0
I
•
I
•
I
•
•
I
•
I
•
•
I
•
I
•
•
I
•
I
•
•
I
•
I
•
•
I
•
I
•
•
I
•
I
•
Annually
Every 100 operating hours
Every 50 operating hours
Every 40 operating hours
Once after 20 operating hours
Once after 10 operating hours
Change the front brake fluid. (
a
p. 146)
Change the rear brake fluid. (
a
p. 153)
Change the hydraulic clutch fluid. (
0
p. 238)
Lubricate the steering head bearing. (
0
p. 39)
Service the fork. (
a
p. 20)
Service the shock absorber. (
a
p. 64)
Change the fuel filter. (
a
p. 108)
Perform minor engine service including removing and installing the engine.
(Change the spark plug and spark plug connector. Change the piston, check and
measure the cylinder; check the cylinder head. Check the camshaft and cam
lever. Check the timing assembly. Change the intake flange.)
Perform major engine service including removing and installing the engine.
(Change valves, valve springs, valve spring seats, and valve spring retainers.
Change the connecting rod, conrod bearing and crank pin. Check the
transmission and shift mechanism. Check the oil pressure control valve. Change
the suction pump. Check the force pump and lubrication system. Change the
timing chain. Change all engine bearings. Change the freewheel.)
o
One-time interval
•
Periodic interval
282
•
0
I
0
I
•
•
I
I
•
I
•
•
•
I
I
•
•
•
•