401955-12
LUBRICATION SYSTEM 20
- Pull oil filter
(D
out of the oil filter housing.
I
Lock ring plier (51012011000)
(
a
p. 296)
- Completely drain the engine oil.
- Thoroughly clean the parts and sealing surfaces.
- Lay the motorcycle on its side and fill the oil filter housing to
about½ full with engine oil.
- Fill the oil filter with engine oil and position the oil filter in the
housing.
- Oil the O-ring of the oil filter cover and mount it together with
oil filter cover @.
- Mount and tighten the screws.
Guideline
I
Screw, oil filter cover
I
M6
- Stand the motorcycle upright.
110 Nm (7.4 lbf ft)
- Remove filler plug
(D
from the clutch cover together with the
O-ring, and fill up with engine oil.
Engine oil
•
Info
1 .0 I (1 .1 qt.)
Engine oil
(SAE 1 OW /50)
(
0
p. 290)
I
Too little engine oil or poor-quality engine oil will result
in premature wear of the engine.
- Mount and tighten the filler plug together with the O-ring.
Danger
Danger of poisoning
Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
- Always make sure there is sufficient ventilation
when running the engine.
- Use effective exhaust extraction when starting or
running the engine in an enclosed space.
- Start the engine and check for tightness.
Finishing work
- Check the engine oil level. (
a
p. 250)
..
253