Husqvarna DXR-310, Operator'S Manual

Page: 42 / 84

42 – English
SETTINGS
EXTERNAL TOOL
The machine can be used as a power source to operate external hydraulic tools.
The value for oil pressure and oil flow can be adjusted from port A to B. Select which setting you would like to change
with the selection keys. Use the arrow keys to change the value.
OIL REFIL
The oil level is read through the level sight glass on the hydraulic tank. Top up with oil if the level is more than 0.5 in below
the maximum mark when all cylinders are retracted.
Hold the selection key down to refill oil.
Use the sight gauge to check the oil level when refilling.
TRACK TENSION
Hold the selection key down to activate the track tension.
LCD ADJUSTMENT
Use the arrows up and down to adjust the display’s contrast and brightness.
WORKING LIGHT
Activates/shuts off the work lighting. Press the selection key to switch to another mode.
EXTERNAL TOOL
ON/OFF
SERVICE
Oil flow :
40 l/min (5...65 l/min)
Back
Oil pressure :
140 bar (30...250 bar)
xx bar xx °C
EXTERNAL TOOL
Pressure: 140 bar
Back
Activate
Flow: 40 l/min
Adjust
xx bar xx °C
EXTERNAL TOOL
OIL REFIL
ON/OFF
SERVICE
Back
Activate
OIL REFIL
Hold down
to activate
TRACK TENSION
ON/OFF
Back
Activate
TRACK TENSION
SERVICE
Hold down
to activate
LCD ADJUSTMENT
SERVICE
WORKING LIGHT
ON/OFF
SERVICE