24 – English
ELECTRICAL.SYSTEM
Replacing.the.generator
1. The following components must be removed before
the generator can be replaced:
A. Starter. See page
18
.
B. Flywheel. See page
20
.
2. Remove the bolt for the rear damper element (D)
and upper AV spring (B). Remove the bolt on the
front AV element (D). See fig. 10.
3.
Dismantle the screw on the heater switch (A). See
fig. 10.
4. Dismantle the throttle cable (A), impulse hose (B),
fuel hose (C), earth cable (D) and (E). See fig. 11.
5. Dismantle the sleeve on the carburettor adjustment,
short-circuit cables (F) and (H). Loosen the cable (I)
on the carburettor heater. See fig. 11.
Fig. 11
Fig. 10
I
G
H
F
C
D
B
A
E
C
A
D
B
A
