Husqvarna 525HE3, Operator'S Manual

Page: 20 / 80

The engine starts but stops again
Problem
Possible cause Recommended step
Fuel tank Incorrect fuel type. Drain it and use correct fuel.
Carburetor Incorrect idle speed. Adjust the idle speed. Refer to To adjust the
idle speed on page 16
. Speak to your servicing
dealer if it is necessary.
Air filter Clogged air filter. Clean the air filter.
Blade
Problem
Possible causes Recommended step
The blade moves
slowly or does not
move.
The blade is blocked
or it is damaged.
Clean the blades from unwanted materials.
Refer to To clean and lubricate the blades on
page 18
. Remove burrs from the blade, refer to
To examine the blades on page 19
. Replace
the blade if it is damaged.
The blade does not
cut easily.
The blade is not sharp
or it is damaged.
Sharpen the blade, refer to
To examine the
blades on page 19 . Replace the blade if it is
damaged.
The blade becomes
hot.
There is friction be-
tween the blades.
Remove burrs from the blade and lubricate the
blade. Refer to To examine the blades on page
19
.
Transportation, storage and disposal
Transportation and storage
• Always allow the product to cool down
before storage.
• For storage and transportation of the
product and fuel, make sure that there are
no leaks or fumes. Sparks or open flames,
for example from electrical devices or
boilers, can start a fire.
• Always use approved containers for
storage and transportation of fuel.
• Empty the fuel before transportation or
before long-term storage. Discard the fuel
at an applicable disposal location.
• Attach the transport guard during
transportation and storage.
• Remove the spark plug cap from the spark
plug.
• Attach the product during transportation.
Make sure that it cannot move.
• Clean and do servicing on the product
before long-term storage.
20 1173 - 001 -