3. Make sure that the vibration damping units
are attached correctly.
To do a check of the muffler
The muffler keeps noise levels to a minimum
and sends exhaust fumes away from the
operator.
• Do a visual check for damage and
deformation.
• Make sure that the muffler is correctly
attached to the product.
• If the muffler on your product has a spark
arrester screen, do a visual check. Replace
the spark arrester screen if it is damaged.
a) Clean the spark arrester screen if it is
blocked. A blocked spark arrester
screen causes the engine to become
too hot which causes damage to the
engine.
b) Make sure that the spark arrestor mesh
is attached correctly.
To do a check of the blades
1. Stop the engine and make sure that the
blades stop.
2. Remove the spark plug cap from the spark
plug.
3. Put on protective gloves.
4. Make sure that the blades are not
damaged or bent. Always replace a
damaged or bent blade.
5. Make sure that the screws to the blades
are tight.
To do a check of the bevel gear and gearbox
WARNING:
To prevent burn
injuries, let the product become cool
before you touch the bevel gear and
gearbox.
• Do a visual check for damage and
deformation.
Fuel safety
WARNING:
Read the warning
instructions that follow before you
use the product.
• Do not mix the fuel indoor or near a heat
source.
• Do not start the product if there is fuel or
engine oil on the product. Remove the
unwanted fuel/oil and let the product dry.
Remove unwanted fuel from the product.
• If you spill fuel on your clothing, change
clothing immediately.
• Do not get fuel on your body, it can cause
injury. If you get fuel on your body, use a
soap and water to remove the fuel.
• Do not start the engine if you spill oil or fuel
on the product or on your body.
• Do not start the product if the engine has a
leak. Examine the engine for leaks
regularly.
• Be careful with fuel. Fuel is flammable and
the fumes are explosive and can cause
injuries or death.
• Do not breathe in the fuel fumes, it can
cause injury. Make sure that there is
sufficient airflow.
• Do not smoke near the fuel or the engine.
8
1173 - 001 -
Summary of Contents for 525HE3
Page 47: ...525HE3 525HE4 Velocidad de corte cortes min 4400 4400 1173 001 47 ...
Page 77: ...1173 001 77 ...
Page 78: ...78 1173 001 ...
Page 79: ...1173 001 79 ...