manualshive.com logo in svg

Husqvarna 4421-DXL, User Manual

The Husqvarna 4421-DXL is a top-of-the-line chainsaw designed for both professional and residential use. With its powerful engine and durable construction, this chainsaw ensures optimal performance and longevity. To get the most out of this exceptional tool, make sure to download the comprehensive Owner's Manual for free at manualshive.com.

Share
Download
background image

Maintenance

8.

Disconnect battery and spark plug (Gas only) wires.

See Disconnecting the Battery – Gasoline/Diesel Vehicle

on page 13

.

9.

The battery should be clean and free of corrosion. Wash the battery top and terminals with a solution of baking
soda and water (1 cup (237 mL) baking soda per 1 gallon (3.8 L) of water). Rinse the solution off the battery. Do
not allow this solution to enter the battery. Be sure the terminals are tight. Let the terminals dry and then coat
them with Battery Terminal Protector Spray (P/N 603 00 00-03).

10. Adjust the tires to the recommended tire pressure.

See Vehicle Specifications on page 56.

11. Perform semiannual periodic lubrication.

See Periodic Lubrication Schedule on page 36.

12. Thoroughly clean the front body, rear body, seats, cargo bed, engine compartment, and underside of vehicle.

13. Do not engage the park brake. Chock the wheels to prevent the vehicle from rolling.

RETURNING THE STORED VEHICLE TO SERVICE

1.

Make sure the key switch is in the OFF position and the Forward/Reverse handle is in the NEUTRAL position.
Chock the wheels.

2.

Restore the fuel system to operation

(Figure 34 or Figure 35)

.

2.1. Remove the plug from the fuel tank vent.

2.2. Connect the vent tube to the fuel tank vent.

3.

Connect battery and spark plug (Gas only) wires.

See Connecting the Battery – Gasoline/Diesel Vehicle on

page 13

. Coat terminals with Battery Terminal Protector Spray (CCI P/N 1014305).

4.

Gasoline vehicles only:

Completely open the fuel shut-off valve

(Figure 14)

. Ensure the valve is fully open.

A partially closed fuel shut-off valve combined with the use of the choke can result in a fouled spark plug and
engine failure.

5.

Place the Forward/Reverse handle in the NEUTRAL position. Crank the engine until fuel is pumped into the
carburetor (gasoline vehicles) and the fuel lines (all vehicles) and the engine starts. Turn the engine off.

See

following NOTE.

NOTE:

Due to the oil added to the gasoline engine in preparation for storage, the engine may smoke excessively for a

short time when it is run for the first time after storage.

6.

Perform the Pre-Operation and Daily Safety Checklist on page 22 and the Performance Inspection on page 23.

MAINTENANCE

See General Warnings on page 11.

To ensure trouble-free vehicle performance, follow an established preventive maintenance program. Regular and
consistent maintenance can prevent vehicle downtime and expensive repairs. Use the Pre-Operation and Daily Safety
Checklist on page 22, the Performance Inspection on page 23, and the following Periodic Service Schedule and
Periodic Lubrication Schedule to keep the vehicle in proper working condition.

Any vehicle not functioning correctly should not be used until it is properly repaired. This will prevent further damage to
the vehicle and help prevent injury to occupants resulting from unsafe conditions.

Contact your local dealer/distributor for repairs and semiannual and annual periodic service.

WARNING

• Only trained technicians should service or repair the vehicle. Anyone doing even simple repairs or

service should have knowledge and experience in electrical and mechanical repair. The appropriate
instructions must be used when performing maintenance, service, or accessory installation.

WARNING CONTINUED ON NEXT PAGE

Page 32

HUV 4421 Owner’s Manual

Summary of Contents for 4421-DXL





































































Reviews:

No comments

Related manuals for 4421-DXL

Meyer BOSS RT FATBOY 1026RT RR Owner'S/Operator'S Manual preview
BOSS RT FATBOY 1026RT RR
Brand: Meyer Pages: 44
Cushman Haulster 84065 Parts & Maintenance Manual preview
Haulster 84065
Brand: Cushman Pages: 158
Blata MIDIQuadard Nstruction Manual preview
MIDIQuadard
Brand: Blata Pages: 24
KAYO MOTOR AU200 Maintenance Manual preview
AU200
Brand: KAYO MOTOR Pages: 138
Kendon Stand-Up TRIKE/SPYDER/SIDECAR Ride-Up SRL Owner'S Manual preview
Stand-Up TRIKE/SPYDER/SIDECAR Ride-Up SRL
Brand: Kendon Pages: 20
Baja motorsports AT250UT Assembly Manual preview
AT250UT
Brand: Baja motorsports Pages: 24
Nimos Micro-Trac User Manual preview
Micro-Trac
Brand: Nimos Pages: 27
DSRaider EZRaider User Manual preview
EZRaider
Brand: DSRaider Pages: 23
Polaris 2009 Trail Blazer 330 Service Manual preview
2009 Trail Blazer 330
Brand: Polaris Pages: 230

Brands by name

Popular brands

Load more brands