manualshive.com logo in svg

Husqvarna 4421-DXL, User Manual

The Husqvarna 4421-DXL is a top-of-the-line chainsaw designed for both professional and residential use. With its powerful engine and durable construction, this chainsaw ensures optimal performance and longevity. To get the most out of this exceptional tool, make sure to download the comprehensive Owner's Manual for free at manualshive.com.

Share
Download
background image

Seat Latch and Adjustment

WARNING

• Do not operate the vehicle with the ROPS removed. Doing so could result in property damage,

personal injury, or death.

• Do not remove or modify any component of the ROPS structure. Doing so will result in voiding the

ROPS certification and could weaken the ROPS, resulting in serious injury or death.

• Do not operate the vehicle if the ROPS is damaged. If the ROPS is damaged, replace the structure.

Do not attempt repair.

• The driver and passenger must be restrained at all times with the seat belts provided to help prevent

injury in the event of sudden braking, collision, or roll-over.

• In the event of a roll-over, do not attempt to jump or otherwise exit the vehicle. Remain seated with

safety belt fastened and with arms and legs inside the vehicle.

• After inserting the tab, make sure the tab and buckle are locked and that the belt is not twisted.

• Loose fitting seat belts could increase the chance of injury due to sliding under the belt if sudden

braking should occur. Keep the safety belt snug and positioned as low on the hip bone as possible.

• Use a single safety belt for one person at a time. Do not use a single safety belt for two or more

people – this includes children.

• No more than one person per bucket seat at one time. No more than two persons per bench seat at

one time. Do not allow people to ride in any part of the vehicle that is not equipped with a seat and a
safety belt. Do not allow a passenger to hold a child in his or her lap while the vehicle is moving.

• This vehicle is not designed to meet child seat compatibility requirements. Children requiring a child

safety seat must not ride on the vehicle. Comply with state and local laws pertaining to child safety.

CAUTION

• Be careful not to damage the safety belt webbing or hardware.

• Inspect the safety belt system periodically. Check for cuts, fraying, and loose parts. Damaged parts

should be replaced immediately. Do not disassemble or modify the system.

• Keep seat belts clean and dry. If cleaning is necessary, use a mild soap and lukewarm water solution.

Do not use bleach, dye or abrasive cleaners as they may severely weaken the seat belts.

• Do not insert coins, clip, etc. in the buckle as this may prevent the tab from locking into the buckle

properly.

• If the safety belt does not function normally, contact your dealer/distributor or trained technician

immediately. Do not occupy the seat until the safety belt is repaired.

SEAT LATCH AND ADJUSTMENT

The vehicle seat(s) are hinged to allow easy access to the engine compartment. To raise the seat bottom, grasp the
rear side of the seat bottom, and pull firmly in a forward/upward direction.

See following WARNING.

WARNING

• Make sure seat hinges and latches are securely engaged before operating the vehicle.

Vehicles with bucket seat option:

The driver-side bucket seat is adjustable and can be moved forward or backward to accommodate the driver. To adjust
this seat, push the lever located under the driver seat to the left (towards outside of the vehicle). Position the seat, and
return the lever to its original position.

See following WARNING.

HUV 4421 Owner’s Manual

Page 21

Summary of Contents for 4421-DXL





































































Reviews:

No comments

Related manuals for 4421-DXL

Panasonic KX-TGA571 Installation Manuals preview
KX-TGA571
Brand: Panasonic Pages: 8
WABASH COMMUNICATIONS MBS-1P Installation Manual preview
MBS-1P
Brand: WABASH COMMUNICATIONS Pages: 47
Yamaha YFZ45RB Owner'S Manual preview
YFZ45RB
Brand: Yamaha Pages: 156
Yamaha YFZ45YSXH Owner'S Manual preview
YFZ45YSXH
Brand: Yamaha Pages: 154
Chironex SPARTAN 600 EFI Owner'S Manual preview
SPARTAN 600 EFI
Brand: Chironex Pages: 56
Fuelfix Tanks2Go 1200lt Mobile Fuel Tank Trailer User Manual preview
Tanks2Go 1200lt Mobile Fuel Tank Trailer
Brand: Fuelfix Pages: 17
Yamaha YFM700RV Service Manual preview
YFM700RV
Brand: Yamaha Pages: 26
Yamaha YZF-R1 Owner'S Manual preview
YZF-R1
Brand: Yamaha Pages: 130
Yamaha YFM80GV Owner'S Manual preview
YFM80GV
Brand: Yamaha Pages: 116
Yamaha YFM90RY Owner'S Manual preview
YFM90RY
Brand: Yamaha Pages: 120
Yamaha YFM700RA Owner'S Manual preview
YFM700RA
Brand: Yamaha Pages: 154
Yamaha YFM700RF Owner'S Manual preview
YFM700RF
Brand: Yamaha Pages: 160
Yamaha YFM700RD Owner'S Manual preview
YFM700RD
Brand: Yamaha Pages: 162
Yamaha YFM7FGX Owner'S Manual preview
YFM7FGX
Brand: Yamaha Pages: 184
Yamaha YFM660RN Service Manual preview
YFM660RN
Brand: Yamaha Pages: 328
Yamaha YFM700RV 2006 Service Manual preview
YFM700RV 2006
Brand: Yamaha Pages: 409
Monzana 105461 Instruction Manual preview
105461
Brand: Monzana Pages: 13
Hsun HS700UTV Maintenance Handbook preview
HS700UTV
Brand: Hsun Pages: 150

Brands by name

Popular brands

Load more brands