4
3.
1.
2.
Learn your Platinum
Unpack your sewing machine
1. Place the machine on a table or cabinet, remove the packaging and lift
off the cover.
2. Remove the packing material, the foot control and
À
nally the protection cover.
3. The machine is delivered with an accessory bag and a main cord.
4. Wipe off the machine, particularly around the needle and needle plate to remove any
soil before sewing.
Connect the Foot Control Cord
Among the accessories you will
À
nd the foot
control cord and the main cord. Connecting the
foot control cord to the foot control is only nec-
essary the very
À
rst time you are going to use the
machine.
1. Take out the foot control cord. Turn the foot
control over. Connect the cord to the socket
inside the space of the foot control.
2. Push
À
rmly to make sure it is properly con-
nected.
3. Put the cord through the slot on the right
hand side of the foot control.
Connect to the Power Supply
On the underside of the machine you will
À
nd
information about the power supply (V) and the
frequency (Hz).
Before plugging in the foot control, check to
ensure that it is of type “FR4” (see underside of
foot control).
1. Connect the foot control cord to the front
socket on the bottom right side of the
machine.
2. Connect the power cord to the rear socket on
the bottom right side of the machine.
3. When you press the power switch to ON,
both the machine and the light are switched
on.
For the USA and Canada
This sewing machine has a polarized plug (one blade
wider than the other). To reduce the risk of electric shock, this plug is intended to
À
t in a polarized
outlet only one way. If the plug does not
À
t fully in the outlet, reverse the plug. If it still does not
À
t,
contact a quali
À
ed electrician to install the proper outlet. Do not modify the plug in any way.
