47
Embroidery
Hoop the Fabric
1. Loosen the screw on the larger outer hoop.
Remove the inner hoop. Place the hoop on a
À
rm
Á
at surface with the screw on the lower
right. There is a small arrow in the center of
the lower edge of the hoop which will line up
with a small arrow on the inner hoop.
2. Place stabilizer and the fabric on top of the
outer hoop and place the inner hoop on top of
the fabric with the small arrow at the bottom
edge.
3. Push
À
rmly on the inner hoop to push it into
the outer hoop.
NOTE
:
Be sure to loosen the hoop screw enough for
the fabric and stabilizer thickness, so you can push
the inner hoop in place. Push in on the sides of the
large hoop.
Tighten the hoop screw. The fabric should
be very taut in the hoop for the best results.
Use the Screw Grip to tighten the hoop screw
properly.
Embroidery Template
Because the embroidery designs are pic tured
actual size in the booklet it is easy to place the
embroidery on your garment or project.
1. Place the template over the picture of the
selected design in the booklet.
2. Use the template pencil to trace the outline of
the design onto the template.
3. Use the template to position the design on
the project to be em broi dered. Through cut
outs on the template you can mark the center
point, the sides and the top and bottom of the
embroidery area. Use the Pictogram Pen to
mark the fabric.
4. When hooping the fabric, place the fabric
and the inner hoop so that the markings on
the fabric matches the markings on the inner
hoop. Take the time to be sure the marks are all
aligned.
5. Push the inner hoop into the outer hoop and
tighten the screw with the Screw Grip.
NOTE
:
Read more about Stabilizers and
Hoops in the Accessory User’s Guide.
