18
Functions and InfoDisplay on your Platinum 775
NEEDLE
STOP
UP
/
DOWN
is used to
move the needle down or up and/
or to set the needle stop position up
or down.
NOTE
:
When sewing, the needle can be
raised/lowered by lightly tapping the foot
control.
STOP
is used to conclude a stitch.
Your Platinum 775 fastens the
thread and stops automatically
when a stitch sequence has been
completed.
STOP
is cancelled when
you touch the button again or by
selecting a new stitch. When
STOP
is active, an icon is shown on the
display. The stop-function can be pro-
grammed.
FIX
is used to tie off stitches. When
the button is pressed, an icon is
visible on the display. By pressing
the button again the function can
be turned off. When beginning to
sew, Platinum 775 sews a few tie
off stitches and goes on with the
selected stitch. Touch
FIX
while
sewing and Platinum 775 sews a
few tie off stitches and stops auto-
matically. The
À
x-function can be
programmed.
Touch
+
SPEED
or
-
SPEED
to
increase or decrease the sewing
speed.
All stitches in Platinum 775 have a
pre-set, recommended sewing speed.
When you select a stitch Platinum
775 automatically sets the correct
sewing speed.
If you have reduced the speed
manually, your setting is retained and
kept for all stitches until your Plati-
num 775 is turned off.
START
/
STOP
is touched when you
want to run the machine with-
out using the foot control. Touch
START/STOP to begin and touch it
again to stop sewing.
REVERSE
is pressed to sew in reverse.
When the button is released, Plati-
num 775 sews forwards. The longest
reverse stitch length is 3 mm.
For permanent reverse, touch the
button twice in quick succession
before starting to sew. The reverse
sewing is indicated by an icon on the
display.
Platinum 775 sews in reverse until
you touch the button again.
Function Buttons
