41
Functions and InfoDisplay on your Platinum 955E
Programming
With Platinum 955E you can program stitches
and letters into combinations. Save the pro-
grammed combinations in the permanent memo-
ries. A pro-grammed stitch combination that is
saved is retained in the memory even when the
machine is turned off.
PROG mode
Touch
FUNC
to activate the
PROG
mode.
Memories
Touch
M
to select memory. The “M” and
the number that follows indicates the
active memory. There are four different
memories (M1 to M4). Each of the four
memories holds up to 30 stitches, which
means that you can program and save up
to 120 stitches and/or letters.
When
PROG
is selected, the last used
memory is active. To save your pro-
grammed combination in a memory
other than the active, select the memory
number
À
rst, before programming any
stitches. The combination will be saved
automatically when entering the stitches.
Move between programmed
stitches
Use the right arrow button to move to
an empty position if you want to enter
another stitch.
Also use the arrow buttons to step
between the programmed stitches. On the
InfoDisplay you see the number of the
stitch in the programmed combination.
Delete Stitches or Programs
If there is a stitch or letter combination
in the currently selected memory, touch
CLR
to clear the memory. The memory is
cleared from the current position until the
end. To reload a deleted program, touch
CLR
again before you enter new stitches
or before touching the arrow buttons.
NOTE
:
When programming letters, you
have the possibility to decrease the dis-
tance between two letters. Select
<
(stitch 34)
when any of the alphabet sub menus are active,
to program short reverse stitches. The more
reverse stitches you program the shorter the
distance to the next entered letter.
NOTE
:
Stitches 15-19 cannot be programmed.
If trying to program them, your Platinum
beeps and the stitch number
Á
ashes on the
InfoDisplay. Select another stitch.