36
Functions and InfoDisplay on your Platinum 955E
CLR
Touch this button in
PROG
to delete the
whole or a part of a program. When a
program in a memory has been deleted,
the stitch number indication will be
cleared from the InfoDisplay.
When sewing buttonholes using the
Sensor Buttonhole Foot,
CLR
is used
to switch the stitch length -/+ buttons
between button size and stitch length set-
ting.
Stitch Selection Menus
Your Platinum 955E has two different
main menus:
Stitches
Alphabet menu
In the Overview Window in the upper
right corner of the InfoDisplay the cur-
rently selected menu is shown.
FUNC
Touch this button to step between the
different modes of your Platinum 955E.
There are three different modes, norm,
PROG
and
REP
. The
NORM
mode (normal
sewing mode) is always active when the
machine is turned on. Touch once to
activate the
PROG
mode (used when pro-
gramming), then touch again to enter the
REP
(repeat) mode that is used to sew a
programmed combination. Touch again
to return to
NORM
mode. The active
mode is indicated on the InfoDisplay.
Arrow Buttons
These buttons are used to advance or
return within a programmed stitch com-
bination.
Memory
Your Platinum 955E has four different
memories where programmed combina-
tions can be saved. Each memory will
hold up to 30 stitches or letters. The
button is used to advance to the memory
required in
PROG
or
REP
. The current
memory number is shown in the right
corner of the InfoDisplay.
