manualshive.com logo in svg

Husqvarna Viking Platinum 775, User Manual, Page: 45 / 64

Share
Download
Husqvarna Viking Platinum 775 User Manual Download Page 45

43

Functions and InfoDisplay on your Platinum 955E

Change a Stitch or Letter

Any stitch or letter can be changed in 

PROG

 

when the stitch number is shown 

in the InfoDisplay. Simply step through 
the numbers of  the stitch combination 
with the arrow buttons until you see the 
number of  the stitch or letter you would 
like to change, and select the correct 
stitch to replace it.

Adjust Stitches in a Program

If  you want to adjust a stitch or letter 
in a programmed combination, use the 
arrow buttons to step to the stitch. You 
can adjust the stitch length and width or 
mirror image a stitch/letter.
The changes will automatically be stored 
in the permanent memory.

Sew your Program

To sew your program, touch 

FUNC

 

to 

bring up the 

REP

 

mode. Utility Foot B is 

recommended. 
A programmed stop is indicated by a stop 
icon 

 on the InfoDisplay. 

To check your stitch program, use the 
arrow buttons to move forwards/back-
wards in the program.
Sew your program on a stabilized piece 
of  fabric.

Adjust Entire Stitch Program

In 

REP

 

touch 

 to mirror image the 

entire program. The changes will not be 
saved in the permanent memory.

Summary of Contents for Platinum 775

































































Reviews:

No comments