UltraScan PRO Supplemental Manual for EasyMatch QC Ver. 2.0
14
Figure 13. Activate License
i.
Option #1: Key ID.
This method is for copying the ID from an email or writing down the 32-digit code.
This requires an internet connection.
a.
From the
CHOOSE AN OPTION
page (Figure 13), select
KEY ID
.
b.
Paste-in or type-in the License Key ID and click
ACTIVATE
.
c.
An acknowledgement will be displayed showing the activation status.
ii.
Option #2: Key File (.skl)
This method is for using the SoftKey License (.skl file) on the thumb drive.
a.
Place the thumb drive with the SoftKey License in the USB port.
b.
From the
CHOOSE AN OPTION
page (Figure 13), select
KEY FILE
(.skl).
c.
Browse the USB to find the SoftKey License (.skl) file, then click
ACTIVATE
.
d.
An acknowledgement will be displayed showing the activation status.
iii.
Option #3: Sentinel Key
a.
If the user has a HunterLab USB hardware key, then it can be used with a new
sensor on the same computer. Return to
INSTALL THE SOFTWARE
, Step 5 (Figure
10) and select
SENTINEL KEY
to continue.
iv.
Option #4: 30-day trial
a.
Fill out the registration form provided for the 30-day trial. Connect to the
internet. HunterLab will approve the trial and email the SoftKey license back.
Follow the directions for Option #1 or #2 to complete.
