UltraScan PRO Supplemental Manual for EasyMatch QC Ver. 2.0
10
UltraScan PRO Accessories
The following accessories are provided with the UltraScan PRO system and can be found in the
standards case:
•
White calibrated tile - an everwhite tile placed at the reflectance port (with pegs in the
guidance holes) during standardization. This tile is traceable to the National Institutes of
Standards and Technology (NIST).
•
Light trap - placed at the reflectance port (with pegs in the guidance holes) during
standardization in reflectance modes.
•
Black card device - placed in the transmittance compartment during standardization in a
transmittance mode.
•
Fluorescent standard - used to calibrate the position of the UV filter.
•
Green tile - placed at the reflectance port (with pegs in the guidance holes) to check
instrument performance.
•
Didymium filter - screwed into the lens as a check for wavelength accuracy.
•
Tile data sheet - Gives calibration information for the standard tiles.
•
Non-slip pad for sample clamp - can be placed into the sample clamp as a replacement for
the white disk for applications that require a non-slip or dark backing.
•
Standards care card - gives instructions on how to clean the standards.
•
Fuses - two fuses are provided as spares.
•
Allen wrench -
one 1/8” wrench is provided.
•
RS-232 communications cable.
•
USB to serial adapter cable.
•
Power cord.
•
Certificate of traceability for the standard tile.
