manualshive.com logo in svg

Hunt Graphics Image 6100, Manual

The Hunt Graphics Image 6100 is a high-quality graphics imaging device, designed for professionals and enthusiasts alike. Its user-friendly interface guarantees effortless operation, even for beginners. To ensure optimal usage, you can easily access and download the comprehensive user manual for free from our website, manualshive.com.

Share
Download
background image

51                                                                                  

3

      

H

ACCESSORIES _______________________________________________________________________________

The following list of accessories is included in the Accessory Pack and can be ordered through a Hunt Graphics
Sales Office near you.

Accessories ----------------------------Part # --------------------------Usage
Owner’s Manual ----------------------#350061-----------------------Instruction/Information
Quick Reference Guide-------------#350065-----------------------Recommended Settings
Terry Cloth Towel --------------------#350011-----------------------Roll Cleaning
Image Roll Cleaner ------------------#350020-----------------------Roller Adhesive Removal
5/16” T-handle-------------------------#312001-----------------------Brakes/Lock Collar
3/16” Allen Wrench ------------------#313020-----------------------Table Arms Installment
Tape Measure -------------------------#350015-----------------------Supply Media Alignment
Zippy Cutter ----------------------------#350002-----------------------Laminate Cutting
Razor Blades --------------------------#270600-----------------------Zippy Cutter Blades
Grease Gun ----------------------------#350021-----------------------Bearing Maintenance
Gun Adapter ---------------------------#350022-----------------------Bearing Maintenance
High Temp Grease-------------------#350007-----------------------Bearing Maintenance
Edge Wrap Tool ----------------------#350003-----------------------Image Mounting
Door Keys ------------------------------#052032-----------------------(Cabinets) Maintenance
O-Rings (4)-----------------------------#169007-----------------------Clutch Drives
Female Air Coupler ------------------#246701-----------------------Air Compressor
2 Amp Fuse ----------------------------#142112-----------------------Electrical
3 Amp Fuse ----------------------------#142110-----------------------Electrical

Also enclosed:
Installation Acceptance Form -----#314010

Hunt Graphics offers a comprehensive line of mounting and laminating equipment and supplies to add to your
creative potential.
Contact your nearest sales office; see rear cover for location nearest you.

Summary of Contents for Image 6100






















































Reviews:

No comments

Related manuals for Image 6100

ibico pouchMaster Pro Instruction Manual preview
pouchMaster Pro
Brand: ibico Pages: 28
3M Scotch TL901 Instruction Booklet preview
Scotch TL901
Brand: 3M Pages: 2
UNITED OFFICE ULG 350 B1 Operating Instructions And Safety Instructions preview
ULG 350 B1
Brand: UNITED OFFICE Pages: 134
Mefu MF1700-M1+ Manual preview
MF1700-M1+
Brand: Mefu Pages: 11
Mefu MF1600-M1 Manual preview
MF1600-M1
Brand: Mefu Pages: 11
Mega Electronics 22-22812-1 User Manual preview
22-22812-1
Brand: Mega Electronics Pages: 10

Brands by name

Popular brands

Load more brands