DECALING (PRESSURE-SENSITIVE) _____________________________________________________________
PROCESS:
Creating a decal by applying a cold pressure-sensitive over-laminate to the top and a cold pressure-sensitive mounting adhesive to the bottom
of a graphic. Then remove the release liner from the mounting adhesive and apply the image directly for its intended purpose or later to a
mounting board or other substrate for display.
MEDIA:INK JET, ELECTROSTATIC AND PHOTOGRAPHIC
FILMS:
-- -- --
Top Unwind:
Pressure-sensitive over-laminate
_____
Bottom Unwind:
Pressure-sensitive mounting adhesive
LAMINATOR SETTINGS:
Front Control Panel
Top Roller Temp:
OFF
Bottom Roller Temp:
OFF
Main Roller Pressure:
40-60 PSI
Motor Speed Setting:
3-5 FPM (1-1.5 MPM)
Motor Direction:
Forward ___ Reverse _X_
Cooling Fans:
On ___ Off _X_
Back Control Panel
Pull Rollers:
Up ____ Down __X__
Pull Roller Pressure
40-60 PSI
Pull Clutch Tension
65-70 PSI
WEBBING SETTINGS
Web Tension Top:
None _X_ Med. ___ Heavy___
Web Tension Bottom:
None _X_ Med. ___ Heavy___
Chill Idlers: [Over/Under]
1
st
Over__ 2
nd
Over__
Sheet Fed: __X__
Roll Easel: _____
Shim Wheel Settings:
-1/16 (-2mm)
