Hunt Graphics Image 6100, Manual

Page: 23 / 53

23
3
H
PRESET PROGRAMS __________________________________________________________________________
Purchasers should individually determine, prior to use, the suitability
of each material for their specific purpose. Hunt Graphics does not
accept liability for risks associated with the performance of materials
in application.
PROGRAM 1: FLEXIBLE DISPLAYS (ENCAPSULATING)
(See webbing diagram - P 25.)
Flexible displays are made by encapsulating, or sealing a print
between two layers of hot laminating film or between a hot laminate
and a hot backing film.
Roller Films Temperature
Top
Jet Guard Crystal Matte
185-203°F/ 85-95°C
Bottom
Jet Guard Gloss
185-203°F/85-95°C
Speed 3-5 FPM or 1–1.5 MPM
PROGRAM 2: POP-UP DISPLAYS
( See webbing diagram - P 29.)
Pop-up display component panels are made by encapsulating, or
sealing a print between a hot laminate and a hot backing film.
Roller Films Temperature
Top Jet Guard Deep Crystal 195°F/ 95°C
Bottom Stoplight 220 or 370 200°F/105°C
Speed 3 FPM or 1 MPM
PROGRAM 3: RIGID DISPLAYS
( See webbing diagram - P 30.)
First you have to make a decal. Then apply a laminating film to the
face of the print, and a pressure-sensitive adhesive to the back.
Then mount the print to a smooth, flat substrate of your choice.
Roller Films Temperature
Top Jet Guard Crystal Matte 194-203°F/ 90-95°C
Bottom Print Mount “R” Ambient to 122°F/ 50°C
Speed 3-5 FPM or 1–1.5 MPM
When using a preset program, the temperature will automatically
activate. Settings provided are for optimal performance using Seal’s
recommended film combinations.
PROGRAM 4: RIGID BACKLIT DISPLAYS
(See webbing diagram - P. 35.)
Make a rigid display by face-mounting an image to a clear acrylic
using an optically clear pressure-sensitive adhesive. Coat the acrylic
and mount the print. A diffuser film can be applied to the back as
needed.
Roller Films Temperature
Top Optimount Ambient to 113°F/45°C
Bottom Ambient to 113°F/45°C
Speed 3-5 FPM or 1–1.5 MPM
PROGRAM 5:
FLOOR GRAPHICS
(See webbing diagrams- P. 30.)
First make a decal by applying a special non-slip, durable laminating
film to the face of the print, and a permanent/removable pressure-
sensitive adhesive to the back. Then, using a hand roller and
burnishing tool or squeegee apply the graphic to a clean, smooth
floor.
Roller Films Temperature
Top Seal’s Floor Guard 194-203°F/90-95°C
Bottom Floor Grip 1 Ambient to 122°F/50°C
Speed 3-5 FPM or 1–1.5 MPM
PROGRAM 6: ONEPASS DISPLAY
( See webbing diagrams- P 29 and 30.)
OnePass Displays are created by taking a printable laminate and
using the laminator seal it into a foam board or a rigid board.
Roller Films Temperature
Top Seal’s OnePass 220°F/105°C
Bottom NA Ambient to 110°F/45°C
Speed 3 FPM or 1 MPM