Hunt CCTV HKB-1100KI User Manual Download Page 49

Page: 49 / 120

User Manual of HBK-1100KI Network Keyboard

the current group.

You can click

to delete the added camera.

4.4 Output Settings

Click Output on the main interface to enter the Output Settings interface.

Search by IP or domain is supported. Input the IP address or domain of the device in the text field and click the

Search button.

The list has displayed all output channels added to the current login user.

4.4.1 Playback on Monitor

Select an output channel from the output list and click the

icon to enter the Playback interface.

Note:

Before operating the playback, you must configure the output settings first. Please refer to 4.2.3 Output

Settings.

Playback by File

Steps:

Click the By File tab to enter the playback by file interface.

Input the display window.

Note:

Please refer to the window-division mode in the 4.2.3 Output Settings before inputting the display window

here.

Input the Camera No. for playback.

If the encoding device is ATM DVR, you can input the Card No.

Summary of Contents for HKB-1100KI

























































































































Search results

Summary of Contents for HKB-1100KI

Reviews:

Related manuals for HKB-1100KI

Brands by name

Popular brands

Hunt CCTV HKB-1100KI, User Manual

Search results

Summary of Contents for HKB-1100KI

Reviews:

Related manuals for HKB-1100KI

Brands by name

Popular brands