User Manual of HBK-1100KI Network Keyboard
38
Configuring IP Camera
If the current Encoder device is Hybrid DVR or NVR type, you can also enter the Channel List interface by clicking
Set beside IP Camera Management on the Camera Settings interface.
Adding IP Camera:
1.
Click the IP Camera List tag to enter the IP camera management interface.
2.
Click Add to enter the IP Camera Parameters interface.
3.
Configure the Camera No., Registration Mode (IP address/domain name), IP address/ Domain name, Port,
User Name, Password, Channel No. and Factory (protocol type) to add the IP camera.
4.
Click OK to save the settings.
5.
On the Channel List interface, click Apply to finish the adding of the IP camera.
Editing Status of Analog Camera:
For Hybrid DVR, you can view the status of the connected analog camera, as well as increase the number of IP
camera to add by changing the disabling the analog camera (s).
1.
Click the Analog List tag to enter the analog camera management interface. You can the information of the
connected analog camera.
2.
Click Status to enter the Analog Camera Status interface.
3.
You can de-select the camera (s) to disable the analog camera(s) connected.
