Hunt CCTV HKB-1100KI User Manual Download Page 18

Page: 18 / 120

User Manual of HKB-1100KI Network Keyboard

13. The added device (s) for the current user can be displayed on the User List interface.

14. You can directly click the

(Login) icon of a user to switch its operating interface.

Or you can click Logout on the admin main interface, the message box “Logout Now?” will pop up. Click Yes

to confirm the logout, or No to cancel the operation.

2.7 Quick Operation

Multi-division Display

The Operator user is allowed to select different multi-division display modes for the selected output channel.

Currently, 1/4/9/16-division display modes are configurable.

Steps:

1. Press the Num + MON keys to select the monitor.

2. Press the Num + MULT keys to select the multi-division display mode for the output channel.

Display of Decoded Video on Monitor

Steps:

1. Press the Num + MON keys to select the monitor.

Summary of Contents for HKB-1100KI

























































































































Search results

Summary of Contents for HKB-1100KI

Reviews:

Related manuals for HKB-1100KI

Brands by name

Popular brands

Hunt CCTV HKB-1100KI, User Manual

Search results

Summary of Contents for HKB-1100KI

Reviews:

Related manuals for HKB-1100KI

Brands by name

Popular brands