4. Pivot the bracket until the pod is at least 2" (50.8 mm) from the lift assist
base and at least 1/2" (13 mm) from the trolling motor shaft. See the
illustration
Measuring the Safety Distance of the Pod and Positioning the
Bracket
.
WARNING!
The pod must not hit the trolling motor shaft, lift assist base, or any
objects. These measurements are also critical during transport when the pod is stowed
with the trolling motor.
5. Close the bracket lock.
NOTE:
For a secure installation, it should take significant force to lock down the
bracket. The bracket lock can be tightened by adjusting the tightness of the screws (see
the illustration
Positioning the Bracket
). If you adjust the screws, make sure you
adjust each screw equally.
Measuring the Safety Distance of the Pod
lift assist base
2
"
(50.8 mm)
Minimum
from pod to
lift assist base
1/2
"
(13 mm) Minimum
from pod to trolling motor shaft
29
he
f the
AS 360 TM
TM_360_Ultrex_IG_532178-2EN_A.qxp_30895_Eng_531478 2/16/17 5:33 PM Page 29
