Install the Bracket
As determined in the
Assemble the Bracket
section, the bracket can be mounted on
the left or right side of the trolling motor.
1. Align the plate below the BowGuard. Line up the holes on the plate with the
threaded holes on the BowGuard.
2. Install the (4) 5/16-18 x 1" screws through the plate and into the BowGuard.
Hand-tighten using a 5/16 nut driver until secure (see the illustration
Installing the Bracket
).
Hand-tighten only!
BowGuard
1" screw
(5/16 - 18 x 1")
Installing the Bracket
plate
17
n)
t.
te
d-
AS 360 TM Ultrex
TM_360_Ultrex_IG_532178-2EN_A.qxp_30895_Eng_531478 2/16/17 5:33 PM Page 17
