42
Key Functions
INFO Key
Press the
INFO key
while in Bird's Eye, Chart, or Combo View
to display information about objects that are near an active
cursor. If the cursor is not active, the Chart Info submenu will
be displayed. See
Views: Viewing Cartography
for more
information.
NOTE:
Your control head will have one of the INFO keys shown
here. Both keys function in the same way.
MARK Key
Press the
MARK key
while in any view to mark the position of
a waypoint. The MARK key function is available if the GPS
receiver connected.
•
Active Cursor:
The waypoint will be marked at the cursor location.
•
Without Active Cursor:
The waypoint will be marked at the boat
location.
•
If Screen Snapshot is active
, a waypoint will be created, and a
screen snapshot will also be saved to the optional-purchase
MMC/SD card (see
Views: Snapshot and Recording View
).
Navigation is not affected by the Screen Snapshot feature.
NOTE:
If Screen Snapshot is enabled but there is not a GPS receiver
connected, pressing the MARK key will capture the screen image and display
an error saying that a GPS position fix is required to create a waypoint.
NOTE:
You must have an optional-purchase MMC/SD card installed for the
screen snapshot feature to work.
GOTO Key
The
GOTO key
has multiple functions, which depend on the
situation.
•
Active Cursor:
Press the GOTO key while in any view to create a
waypoint and start navigation towards that waypoint.
•
Without Active Cursor:
Press the GOTO key to display the saved
waypoints list, and then highlight a waypoint. Press the RIGHT
Cursor key to begin navigation.
•
Man Overboard:
Press and hold the GOTO key for more than 1.5
seconds to activate the Man Overboard (MOB) function. Once MOB
is activated, any current navigation will be cancelled and the current
route will be discarded without notification (see
Man Overboard
(MOB) Navigation
).
ZOOM (+/-) Keys
The
Zoom keys
function in different ways which depend on
the view displayed.
•
Navigation Views or the Sonar Zoom View:
Press the
+/- ZOOM key to change the scale of the view to appear
closer or farther away.
•
Side Imaging® View:
Press the - or + ZOOM keys to
change the scale of the view. The cursor must be active
for zoom to work in the Side Imaging® View.
Summary of Contents for 858c Combo
Page 1: ......
Page 10: ......
Page 159: ...149 Appendix A Side Imaging Transducer Mounting Template XHS 9 HDSI 180 T Appendix A...
