135
SI Range Lines
(Advanced, Side Imaging® View only)
Settings: Off, On; Default = On
SI Range Lines
divide each side beam range into four equal sections on the
display. SI Range Lines can be used to interpret the location of objects on the
display. You can turn SI Range Lines On (visible) or Off (hidden).
NOTE:
The range numbers are estimated and should not be used for measurement.
NOTE:
If both SI Range Lines and Contour Mode are turned on, the SI Range
Lines will remain on the display, but the individual range numbers are not available
(see
Side Imaging® X-Press™ Menu: SI Enhance
).
SI Range Lines (with Contour Mode Off)
Range Numbers
SI Range Lines
Sonar Menu Tab
