Hummer H2 2010, Owner'S Manual

Page: 297 / 552

3. Say the name tag to be deleted. The system
responds with “ Would you like to delete, <name
tag>? Please say yes or no ” .
. If the name tag is correct, say “ Yes ” to delete
the name tag. The system responds with “ OK,
deleting <name tag>, returning to the
main menu.
”
. If the name tag is incorrect, say “ No ” . The
system responds with “ No. OK, let's try again,
please say the name tag. ”
Using the Delete All Name Tags Command
The delete all name tags command deletes all stored
phone book name tags and route name tags for OnStar
(if present).
To use the delete all name tags command:
1. Press and hold
b g
for two seconds. The system
responds with “ Ready ” followed by a tone.
2. Say “ Delete all name tags ” . The system responds
with “ You are about to delete all name tags stored
in your phone directory and your route destination
directory. Are you sure you want to do this? Please
say yes or no.
”
. Say “ Yes ” to delete all name tags.
. Say “ No ” to cancel the function and return to
the main menu.
Making a Call
Calls can be made using the following commands:
. Dial
. Digit Dial
. Call
. Re ‐ dial
Using the Dial Command
1. Press and hold
b g
for two seconds. The system
responds with “ Ready ” followed by a tone.
2. Say “ Dial ” . The system responds with “ Dial using
<phone name> ” . “ Number please ” followed by
a tone.
3. Say the entire number without pausing.
. If the system recognizes the number, it
responds with
“ OK, Dialing ” and dials the
number.
. If the system does not recognize the number, it
confirms the numbers followed by a tone. If the
number is correct, say
“ Yes ” . The system
responds with “ OK, Dialing ” and dials the
number. If the number is not correct, say “ No ” .
The system will ask for the number to be
re
‐ entered.
4-111