Hummer H2 2010, Owner'S Manual

Page: 196 / 552

Reducing Speed While Using Cruise
Control
To reduce the vehicle's speed while using cruise
control:
. Press and hold the SET – button on the steering
wheel until the desired lower speed is reached,
then release it.
. To slow down in small amounts, press the
SET
– button on the steering wheel briefly. Each
time this is done, the vehicle goes about 1.6 km/h
(1 mph) slower.
Passing Another Vehicle While Using
Cruise Control
Use the accelerator pedal to increase the vehicle's
speed. When you take your foot off the pedal, the
vehicle slows down to the previously set cruise speed.
Using Cruise Control on Hills
How well the cruise control works on hills depends upon
the vehicle's speed, load, and the steepness of the hills.
When going up steep hills, you might have to use the
accelerator pedal to maintain the vehicle's speed. When
going downhill, you might have to brake or shift to a
lower gear to keep the vehicle's speed down. When the
brakes are applied the cruise control turns off.
Ending Cruise Control
There are three ways to end cruise control:
. Step lightly on the brake pedal.
. Press the
[
button on the steering wheel.
. Press the
T
button on the steering wheel.
Erasing Speed Memory
The cruise control set speed memory is erased when
the cruise control or the ignition is turned off.
4-10