![Hummer H2 2010 Owner'S Manual Download Page 213](http://html1.mh-extra.com/html/hummer/h2-2010/h2-2010_owners-manual_2183784213.webp)
Airbag Readiness Light
There is an airbag readiness light on the center
overhead console, which shows the airbag symbol. The
system checks the airbag's electrical system for
malfunctions. The light indicates if there is an electrical
problem. The system check includes the airbag
sensors, the airbag modules, the wiring and the crash
sensing and diagnostic module. For more information
on the airbag system, see
Airbag System on page 2
‑
66
.
This light comes on when
the vehicle is started, and
flashes for a few seconds.
Then the light should go
out. This means the
system is ready.
If the airbag readiness light stays on after the vehicle is
started or comes on while driving, the airbag system
may not work properly. Have the vehicle serviced by
your dealer.
{
WARNING:
If the airbag readiness light stays on after the
vehicle is started or comes on while driving, it
means the airbag system might not be working
properly. The airbags in the vehicle might not
inflate in a crash, or they could even inflate
without a crash. To help avoid injury, have the
vehicle serviced right away.
4-27
Summary of Contents for H2 2010
