Cruise Grade Braking
Cruise Grade Braking operates while Cruise Control is
engaged in Tow/Haul mode to assist in maintaining
vehicle speed under loaded vehicle conditions. Cruise
Grade Braking assists when driving on a downhill
grade. It maintains vehicle speed by automatically
implementing a shift schedule that uses the engine and
the transmission to slow the vehicle. If vehicle speed is
above the desired speed the transmission will downshift
to slow the vehicle. If vehicle speed is near or below
desired speed the trans will upshift, allowing vehicle
speed to increase.
While in the Range Select Mode (RSM) mode, cruise
grade braking is not available.
See
Automatic Transmission Operation on page 3
‑
32
.
Full-Time Four-Wheel Drive
The Full-Time Four-Wheel Drive transfer case is
designed to constantly send the engine's driving power
to all four wheels for extra traction. To get the most out
of Full-Time Four-Wheel Drive, you must be familiar
with its operation.
Notice:
Driving on pavement in Four-Wheel
High Lock or Four Wheel Low Lock for extended
periods may cause premature wear on the vehicle
powertrain and tires. Do not drive in Four-Wheel
High Lock or Four-Wheel Low Lock on pavement for
extended periods.
Transfer Case Dial
The transfer case dial is
located to the right of the
instrument panel cluster.
Use this switch to shift
into and out of the
different Full-Time
Four-Wheel Drive modes.
3-37
Summary of Contents for H2 2010
