62
20.3 Updating your Touch from a computer
From a computer with Internet access, visit
http://support.humanware.com/support/
latest version of the BrailleNote Touch software. Remove the USB connector from the power adaptor,
and plug the USB connector into one of your computer’s USB port. Make sure the
other end of the
cable, a micro USB connector, is plugged into your BrailleNote Touch. It should be connected to the
micro USB port located on the left edge of your Touch, near the rear end, with the two small hooks on
the connector facing down.
Use your computer’s file browser to transfer the update you downloaded into the root of your
BrailleNote Touch.
From your BrailleNote Touch, launch the KeyUpdater
application you can access through the “All
Applications” item in the Main Menu. Activate the first item to begin the update process.
Your update should start copying and you will be notified of the progress. When it is done copying the
update, your BrailleNote Touch should automatically restart and begin installation. Note that this can
take several minutes.
20.4 Updating an encrypted system
If an update is available but your system is encrypted, you can update your Touch using an S D card.
After inserting an S D card containing at least 1.4 GB of free space, access the notification shade by
pressing ENTER with N. Select “Click here to begin downloading the update file to your external S
D card.
The update will be applied and the file
removed upon the completion of the update process”. The
update will then be downloaded on the S D card, and once ready, your Touch will restart and install the
update.
Appendix A
–
Braille Keyboard Command
Summary
The Command summary chapter provides a list of commands used in all applications.
General
Home button (Main Menu): SPACE with DOTS 1 2 3 4 5 6
Back button: SPACE with E
Enter: DOT 8
TTS Volume up: ENTER with DOT 4
TTS Volume down: ENTER with DOT 1
