Hughes HX90, Installation Manual, Page: 62 / 124

Chapter 5 • Completing the installation
62
1039456-0001 Revision A
5. Check the Software Download Status.
If it reads
All files are up-to-date
, the router has been commissioned.
6. Wait 15 minutes after completing registration for all files to be downloaded from
the NOC to the router.
7. If
All files are up-to-date
does not appear after 15 minutes, restart
the router:
a. Go to the System Control Center home page.
b. In the Help section, click
Restart HX90
.
8. If you do not see the All files are up-to-date message, power cycle the satellite
router:
a. Unplug the power cord from the power source.
b.
If the router is connected to a DC power source , unplug the DC input cable
from the router’s power supply.
c. Wait 5 sec.
d. Plug the power cord back into the power source.
e.
If the power source is DC , plug the input cable back into the power supply.
Do not power cycle the satellite router by unplugging the power cord from the
router’s rear panel. Doing so could result in static electricity discharge that could
shock you and/or damage the router.
CAUTION