Hughes HX90, Installation Manual, Page: 37 / 124

Chapter 4 • Commissioning the satellite router
1039456-0001 Revision A
37
Entering the antenna location (manual entry)
This is an alternate method for entering the antenna location. Use it only if you need
to manually enter the antenna location. Use this method for router installations
outside the United States or Canada.
Skip this section if you have entered a ZIP code for the antenna location.
1. On the Antenna Location screen (Figure 15 on page 36), click the Enter Location
Manually checkbox.
The Manual Entry of Antenna Location screen appears.
Figure 17: Manual Entry of Antenna Location screen
2. Enter the latitude and longitude for your location.
Enter latitude and longitude in degrees, to the nearest tenth of a degree.
3. Be sure to select from the drop-down list boxes (Latitude: North or South,
Longitude: East or West).
4. Click
Next
.
Note: There is no verification screen when you manually enter the antenna
location.
Entering satellite parameters
1. On the Satellite Parameters screen, click the Satellite Transponders drop-down
list.