Hughes HN9400, Installation Manual

Page: 95 / 134

Satellite router status Appearance LED
Receiving data Blinking
Condition preventing receipt of data Off *
Connection established with the NOC On System
Virus protection blocking data Blinking *
Condition preventing full operation Off *
Power is on and the router is functioning normally On Power
Operating with fallback.bin (backup) version of software Flashing
Router is not commissioned or has lost its configuration data Blinking
No power Off *
Bold type indicates LED appearance during normal operation when the satellite router is transmitting or
receiving data.
*Indicates an operational problem.
If it appears the LEDs are not functioning properly, make sure you have the correct power supply.
Refer to
Table 2: Power supply specifications for the HN9400 satellite router on page 10 for
detailed power supply information.
LAN port LEDs
Green and orange LEDs on the each of the two LAN (Ethernet) ports on the router’s rear panel
indicate link status and speed, as explained in
Figure 67: LAN port LEDs on page 83.
Figure 67: LAN port LEDs
Using LEDs for troubleshooting
For information on using the satellite router’s LEDs for troubleshooting, see:
83
HN9400 Satellite Router Installation Guide
1038554-0001 Revision B
Chapter 7 LEDs