Hughes HN9400, Installation Manual

Page: 58 / 134

2. On the Registration Server Selection screen, select a registration server from the drop-down
list.
• For U.S. and Canadian consumer installations, select SAN_and_PIN_Registration .
• For enterprise installations and installations outside of the United States and Canada,
select
SiteID_Registration
.
If you are unsure which server to select, refer to the Installation Reference Sheet or installation
specification.
Figure 35: Selecting the registration server
If necessary, you can manually enter the registration server’s address as follows:
a) Select the Enter Registration Server Address Manually
checkbox.
b) Enter the registration server’s address in the HTTP:// field.
c) Select the
Secure HTTP Mode
checkbox to enable a secure connection to the registration
server.
3. Click Next .
The Registration in Progress screen appears, displaying registration status information.
HN9400 Satellite Router Installation Guide
46
1038554-0001 Revision B
Commissioning the satellite router Chapter 4