Hughes 9502 User Manual Download Page 67

Page: 67 / 72

9502 User Guide

3004146-0001 Rev H

FTP login fail

FTP username or password incorrect

FTP 'type' fail

Could not establish “binary” mode.

FTP 'cwd' fail

Could not change to working directory on FTP server.

FTP data connection fail

Could not establish an FTP data connection with the server.

FTP 'nlst' fail

Could not get list of files in current FTP server directory.
Directory may be empty.

FTP xfer command fail

Could not initiate data transfer on an established connection.
May be caused if filename not found.

FTP found no filename

Could not find a filename in the current server directory.

FTP local file read/write fail

Error while writing downloaded file to UT flash or reading
upload file data.

FTP socket fail

Error while reading or writing FTP data socket.

FTP completion error

Error while closing the current FTP connection.

FTP xfer timed out

FTP client timed out waiting for socket ready (read or write),
e.g. due to loss of connectivity during transfer.

_IGETFW

File in use, cannot download The file to be downloaded is the same (by name) as the image

currently in use.

Starting immediate update… Normal success. File downloaded successfully, now starting

immediate update.

Complete

File listed in the response successfully downloaded to the UT

Downgrade disallowed

Downgrade to lower release blocked to protect hardware.

_IUPDFW

New firmware file not found Could not find filename specified in upgraded control file.

New firmware file corrupt

Firmware file failed checksum test.

New firmware file failure

The new firmware failed to run or failed to acquire the
network and the unit fell back to the old release.

Upgrade admin file error

Problem with local file manipulation during upgrade process.

Upgrade status file error

Problem with local file manipulation during upgrade process

_IGETFILE

Can't overwrite protected
file

File specified in AT command was ‘config.txt’, ‘config.chk’,
‘config_bk.txt’, ‘config_bk.chk’

_IUPDCFG

Can't use reserved file

Attempt to use one of protected config files as the new
config.txt file.

_IREMWEB

Invalid IP address string

An IP address parameter string could not be interpreted as a
legitimate IP address.

Global IP: <ip_addr>

REMWEB connection set up successfully. Indicates global IP
address assigned to the UT’s own PDP context, to which an
HTTP connection may be made.

Table 6 - AT Unsolicited Response Codes

Summary of Contents for 9502









































































Search results

Summary of Contents for 9502

Reviews:

Related manuals for 9502

Brands by name

Popular brands

Hughes 9502, User Manual

Search results

Summary of Contents for 9502

Reviews:

Related manuals for 9502

Brands by name

Popular brands