36
9502 User Guide
3004146-0001 Rev H
accessed. All local IP ports are blocked, e.g. so AT commands, and
the upgrader cannot be used. User data can be sent if a PDP
context is up.
To activate the security feature, select “Password Protection” On,
enter the same password string in both fields and press “Apply”. If
the two password fields match, the password is saved and security
is enabled.
The UT will be locked when it restarts, or to immediately lock it,
press “Lock Unit”
Make a note of the password as it cannot be viewed and once
the UT is locked it cannot be accessed.
To deactivate the security feature, select “Password Protection”
Off and press “Apply”.
If the Web UI is accessed when the UT is locked, the browser is
redirected to the Login page and the password must be entered. If
the wrong password is entered three times in a row, password entry
is locked out and the UT must be restarted before the password
will be accepted.
Figure 2-17 – Login Page
