Hughes Network DirecWay DW4020 User Manual Download Page 25

Page: 25 / 102

Important safety information

xxv

Important safety information

For your safety and protection, read this entire manual before you begin to use
the equipment. In particular, read this safety section carefully. Keep this safety
information where you can refer to it if necessary.

Types of warnings
used in this manual

This section introduces the various types of warnings used in this manual to
alert you to possible safety hazards.

Note:

A note contains additional information.

DANGER

Indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.

WARNING

Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation, which, if not
avoided, could result in minor or moderate injury.

CAUTION

Indicates a situation or practice that might result in property
damage.

Summary of Contents for DirecWay DW4020







































































































Search results

Summary of Contents for DirecWay DW4020

Reviews:

Related manuals for DirecWay DW4020

Brands by name

Popular brands

Hughes Network DirecWay DW4020, User Manual

Search results

Summary of Contents for DirecWay DW4020

Reviews:

Related manuals for DirecWay DW4020

Brands by name

Popular brands