Hughes JVC 100, User Manual

Page: 89 / 128

Chapter 4—Setup Adjustments
HJT Model 100 User's Guide 4-37
4.9.3. Color, Tint, Sharpness
The Color, Tint, and Sharpness settings are only active with non-RGB
type VICs. Begin each adjustment by displaying external image.
To adjust Tint:
1. Access T
INT
from the P
ICTURE MENU
.
2. Use the up/down arrow keys to set the desired Tint level.
To adjust Color:
1. Access C
OLOR
from the P
ICTURE MENU
.
2. Use the up/down arrow keys to set the desired Color level.
To adjust Sharpness:
1. Access S
HARPNESS
from the P
ICTURE MENU
.
2. Use the up/down arrow keys to set the desired Sharpness level.
4.9.4. Black Enhance
The Black Enhance feature increases the low level detail in the dark
areas of the image. Adjust the Black Enhance if the dark areas of the
image still do not show enough detail after completing the other picture
settings.
To adjust Black Enhance:
1. Select B
LACK
E
NHANCE
from the P
ICTURE MENU
.
2. Press E
NTER
to toggle.
3. Select the setting that provides the best detail in the dark areas.
4.9.5. VIC Settings
To select specific VIC Option Settings when setting up a new channel:
1. Access VIC S
ETTINGS
from the P
ICTURE MENU
. A submenu appears to
allow the operator to select specific VIC option settings when setting
up new channel.
2. Press escape if the projector uses only one VIC. If the projector has
more than one VIC option, refer to Section 4.11 on page 4-39 for
details on how to set up for optional VICs.
3. VNR (V
IDEO
N
OISE
R
EDUCTION
) is available in the submenu. This
option reduces noise in the image but also reduces detail because it
narrows the video bandwidth. Use trial and error to determine if this
VNR option is appropriate for the image being viewed.