manualshive.com logo in svg

Hughes JVC 100, User Manual

The Yamaha 100 is a sleek and powerful machine, perfect for motorcycle enthusiasts. For all your needs, an Owner's Manual is available to guide you through every step. Download it for free from our website and unleash the full potential of your Yamaha 100.

Share
Download
background image

Chapter 1—Introduction

HJT Model 100 User’s Guide

1-3

4.8.3....................................................................................................................Color Balance (Grey

4.9. ...........................................................................................................................Picture Settings

4.9.1....................................................................................................................Brightness

4-36

4.9.2....................................................................................................................Contrast

4-36

4.9.3....................................................................................................................Color, Tint, Sharpne
4.9.4....................................................................................................................Black Enhance
4.9.5....................................................................................................................VIC Settings 4-37

4.10. .........................................................................................................................Backing up Settings
4.11. .........................................................................................................................Video Input Cards

4.11.1.

Installing (or Removing) a VIC ...........................................................4-40

4.11.2.

Connecting VIC Source Cables .........................................................4-41

4.11.3.

VIC Editing ........................................................................................4-41

4.11.4.

VIC Settings ......................................................................................4-43

4.12. .........................................................................................................................Updating Software

5.0......................................................................................................................Preventive Main

5.1. ...........................................................................................................................Preventive Maintena

5.1.1....................................................................................................................Cleaning the Cabine
5.1.2....................................................................................................................Cleaning the Project
5.1.3....................................................................................................................Air Filters

5-2

6.0......................................................................................................................System Specific
7.0......................................................................................................................Glossary Of Ter
8.0......................................................................................................................Indexes 1

The HJT Model 100 Projector accepts a variety of inputs and operates with a wide range
of frame and raster rates. The projector meets these requirements with sophisticated
computer terminal control, a unique optics system, a high-powered projection arc lamp
and the Hughes-JVC unique ILA

®

 (Image Light Amplifier) assembly.

The projector is intended to be used for the projection of video and graphics, as shown
in this manual. It should not be used for purposes it was not designed for.

1.1.  Shipping and Inspection

The projector is shipped in a standard shipping container which is not reusable.
A reusable container is optional and recommended if the projector is moved and shipped
often. The containers are equipped with tilt and drop indicators to assist in determining if
the projector was handled properly during shipping.

Upon arrival, inspect the container for any abnormal readings, dents, gouges and any
other evidence of rough handling. Immediately report any abnormal readings or
conditions to the shipping company.

After removing the projector from the shipping container, inspect the projector’s exterior
for signs of shipping damage like scratches, abrasions, cracks on paint, or other
surfaces. Report any damage to your shipping company immediately.

1.2.  Items Shipped with the HJT Model 100 Projector

The following items are shipped with every HJT Model 100 Projector:

!

 

1 HJT Model 100 User’s Guide.

Summary of Contents for 100

































































































































Reviews:

No comments

Related manuals for 100

Naxa NVP-2002 User Manual preview
NVP-2002
Brand: Naxa Pages: 20
Miroir M1200S Quick Start Manual preview
M1200S
Brand: Miroir Pages: 5
InFocus SP-CEIL-008 Installation Instructions preview
SP-CEIL-008
Brand: InFocus Pages: 5
Nordic Deltaco ARM-0412 User Manual preview
Deltaco ARM-0412
Brand: Nordic Pages: 12
Skyline Exhibits DesignView Setup Instructions preview
DesignView
Brand: Skyline Exhibits Pages: 21
FART PRODUKT SCREEN Standard Installation Instruction preview
SCREEN Standard
Brand: FART PRODUKT Pages: 5
BoomToneDJ Evo Quattro Led User Manual preview
Evo Quattro Led
Brand: BoomToneDJ Pages: 18
Hitachi CP-AW2503 Specifications preview
CP-AW2503
Brand: Hitachi Pages: 4
Hitachi CP-AW252WN Quick Manual preview
CP-AW252WN
Brand: Hitachi Pages: 4
Hitachi CP-DX250 guide User Manual preview
CP-DX250 guide
Brand: Hitachi Pages: 60
Hitachi CP-AW3003 Specifications preview
CP-AW3003
Brand: Hitachi Pages: 4
Hitachi CP-A52 Series Brochure & Specs preview
CP-A52 Series
Brand: Hitachi Pages: 3
Hitachi CP-DH300 User Manual preview
CP-DH300
Brand: Hitachi Pages: 60
Hitachi CP-AW3019WNM Brochure preview
CP-AW3019WNM
Brand: Hitachi Pages: 2
Hitachi CP-AX2503 Specifications preview
CP-AX2503
Brand: Hitachi Pages: 4
Hitachi CP-EW250N User Manual preview
CP-EW250N
Brand: Hitachi Pages: 91
Hitachi CP-DW10N Brochure & Specs preview
CP-DW10N
Brand: Hitachi Pages: 2
Hitachi CP-AX3503 Specifications preview
CP-AX3503
Brand: Hitachi Pages: 4

Brands by name

Popular brands

Load more brands