Incremental Encoder FG 41
41
9 Replacing the Measuring System
The following points must be noted when replacing the measuring system:
●
The new measuring system must have the same article number (ID) as the measuring
system being replaced; any deviations must be expressly clarified with Johannes Hübner
Giessen.
●
The new measuring system must be installed in accordance with the specifications and
requirements in chapter "Assembly" on page 24 .
●
The new measuring system must be connected in accordance with the specifications in
chapter "
Connection instructions for plug connection
" on page 37.
●
Depending on the application, the output incremental value may need to be adjusted to the
machine reference position.
●
When recommissioning the replaced measuring system, correct functioning must be ensured
first of all by means of a protected test run.
