Incremental Encoder FG 41
27
4. Fix the intermediate disc (5) on the drive side using the fixing screws and the washers (6).
5. Fix the intermediate flange (7) to the intermediate disc (5) using the fixing screws (15) and
washers (15).
6. Lightly grease the shaft of the FG 41 (9).
7. Fit the FG 41 (12) into both the centering (8) and coupling hub (4) at the same time.
8. Secure the FG 41 using at least 6 screws and washers (10) distributed evenly around the
circumference of the flange (7)!
9. Remove the screw plug (17) from the access bore (16) to the coupling.
10. Fix the coupling hub onto the shaft using a set screw (3).
11. Close the access bore in the intermediate flange (16) to the coupling with the screw plug 17).
