background image

P

UB

. 42004-661L2C

GAI-Tronics Corporation  P.O. Box 1060, Reading, PA  19607-1060  USA

610-777-1374  

n

  800-492-1212  

n

  Fax:  610-775-6540

V

ISIT WWW

.

GAI

-

TRONICS

.

COM FOR PRODUCT LITERATURE AND MANUALS

S.M.A.R.T. Emergency Phones

Models 293SL, 293ALSL, 294ALSL, 297SL and 298SL

Confidentiality Notice

This manual is provided solely as an installation, operation, and maintenance guide and contains sensitive
business and technical information that is confidential and proprietary to GAI-Tronics.  GAI-Tronics
retains all intellectual property and other rights in or to the information contained herein, and such
information may only be used in connection with the operation of your GAI-Tronics product or system.
This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third
party.

Introduction

The GAI-Tronics S.M.A.R.T. Emergency Phones are
designed for isolated or high-risk areas.  The rugged
design provides a high degree of protection against
vandalism.

The 293 and 294 Series are constructed of either
Valox® or cast aluminum painted bright safety
yellow.  The flush-mount 297 and 298 Series are
made of 14-gauge, brushed stainless steel.  Refer to
the figures for details of specific models.

In addition to reliable telephone service, these phones
provide remote access and monitoring capabilities.
They can be programmed remotely from another
phone, or by using a PC with GAI-Tronics’
Telephone Management System (TMS) software.

Models 293ALSL – Aluminum Enclosure

Model 294ALSL – Aluminum Enclosure

Model 293SL – Valox® Enclosure

Summary of Contents for GAI-TRONICS S.M.A.R.T. 293ALSL


















Reviews: