Huawei V100R008, User Manual

Page: 70 / 141

ViewPoint 8650C
User Guide
6 Holding a Conference on the Web Interface
Issue 10 (2013-07-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
62
Table 6-2 Component data plan
Component IP Address Other Configuration
8650C 200.54.0.144 None
GK 200.54.0.144
NOTE
Use the embedded GK of
the 8650C.
None
HUAWEI ViewPoint
9000 HD
videoconferencing
endpoint 1 200.54.10.137  Site name: site1
 GK address: 200.54.0.144
 Site number: 0100001
 GK authentication name:
terminal1
HUAWEI ViewPoint
9000 HD
videoconferencing
endpoint 2 200.54.10.138

Site name: site2

GK address: 200.54.0.144
 Site number: 0100002
 GK authentication name:
terminal2
Setting GK
The GK functions as a bridge to transfer call information between videoconferencing
endpoints and the MCU, translates the addresses of the videoconferencing endpoints and the
MCU, and controls calls and bandwidth. The 8650C supports Built-In GK, you can set the
Built-In GK enabled and registers 8650C with it.
Step 1
Enable Built-In GK.
1. Log in to the MCU web interface.
2. Choose Gatekeeper > Settings .
3. Select Enable Built-In Gatekeeper and set GK ID to GK1 .
Remain other parameters the default values.
4. Click OK .
Step 2
Register with GK.
1. Log in to the MCU web interface.
2. Choose Settings > H.323 and SIP > Gatekeeper .
3. Set GK parameters listed in Table 6-3 and other parameters to the default values.
Table 6-3 Gatekeeper parameters
Parameter Description Setting
Register with
Gatekeeper Whether the MCU registers with a GK.
 Selected: The MCU registers with a GK. After the
Select this
option.