Parameter
Description
Setting
Dialing
mode
Specifies the dial-up connection mode.
The dial-up process complies with the
Point-to-Point Protocol over Ethernet
(PPPoE) protocol. To use a dial-up
connection, enter the user name and
password provided by your broadband
access service provider in
User name
and
Password
.
l
Auto
: When your TE30 starts, it
automatically sets up a dial-up
connection over the IP network. If the
dial-up service is not free of charge,
charging starts when the dial-up
connection is set up.
l
Manual
: Your TE30 uses the dial-up
program to access a network. To set up
a PPPoE dial-up connection, you must
choose
Advanced Settings
>
Utilities
>
PPPoE Dialing
>
Connect
.
The default value is
Auto
.
Connection
type
Specifies the mode in which your TE30
obtains an IP address.
l
Static IP
: The network administrator
assigns an IP address to your TE30. If
you select this option, you must also set
Local IP address
,
Subnet mask
, and
Gateway address
.
l
Dynamic IP
: When a DHCP server is
available on the network, your TE30
automatically obtains an IP address
using the Dynamic Host Configuration
Protocol (DHCP).
The default value is
Static IP
.
If you have set
NMS server
,
select
Static IP
for this
parameter.
Local IP
address
and
Subnet mask
Specify the IP address and subnet mask of
your TE30.
Contact the network
administrator.
Examples:
l
IPv4 address: 192.168.1.10
l
IPv6 address:
2000:0:0:0:200:55:26:1
Gateway
address
Specifies the gateway address that
corresponds to the IP address of your
TE30.
This parameter is mandatory only when
Connection type
is set to
Static IP
.
Contact the network
administrator.
Examples:
l
IPv4 address: 192.168.1.1
l
IPv6 address:
2000:0:0:0:200:55:0:1
HUAWEI TE30 Videoconferencing Endpoint
User Guide
3 Network
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14
